Electric-Arc Welding Machine – Xinsheng Welder

WSE-250 AC/DC TIG 220V Aluminum Argon Arc Welder

Xinsheng Welder — Mon, 18 Mar 2024 01:51:00 +0000

Feature

Main functions of the argon arc welding machine WSE-250:
– Multifunctional argon arc welding/manual welding:
When the switch of WSE-250 is set to “TIG” position, it is argon arc welding; when the switch is set to “MMA” position, it is manual arc welding.
– AC/DC conversion function:
When the switch of WSE-250 is placed in the “AC” position, it is AC argon arc welding and can weld aluminum materials. When the switch is placed in the “DC” position, it is DC argon arc welding, which can weld stainless steel, iron, copper and other metals.
– With foot pedal function:
WSE-250 has a switch that is set to “OFF” and the current is adjusted by the panel knob; when the switch is set to “ON”, the current is adjusted by a foot switch.
– The front blowing argon gas time is adjustable:
In order to ensure the welding effect of WSE-250, the argon gas needs to arrive before the current during welding. This knob is used to adjust the interval between the argon gas coming out and the arc coming out (0-2s).
– The post-argon blowing time is adjustable:
WSE-250 The workpiece immediately after welding will be oxidized due to the heat, so after stopping the welding, the argon gas blown out by the welding gun should be cooled for a period of time. This knob is used to adjust the exhaust gas post-blow time (2-10s)
– Adjustable duty cycle:
WSE-250 should use a smaller duty cycle when the current is larger; it should use a larger duty cycle when the current is smaller.
– Adjustable decay time:
When WSE-250 completes a section of welding and closes the arc at the end, in order to ensure good formation, the current is required to gradually decrease to stop. This knob is used to adjust the decay time of the current.
– Comprehensive protection functions for overheating and overcurrent:
When the WSE-250 welding machine is working continuously, for a long time, and with high current, in order to prevent the components from being damaged due to severe internal heating, the overcurrent and overheating protection function is set. When this light is on, you need to stop working, take a rest or restart the machine.

Aluminum Argon Arc Welder (2)

Specification

Aluminum Argon Arc Welder (1)

Pulse TIG welding machine (1)

WSE-200G AC/DC Argon Arc Welding Machine For Aluminum

Xinsheng Welder — Fri, 15 Mar 2024 09:20:58 +0000

Feature

– WSE-200G is suitable for argon arc welding (TIG) and manual welding (MMA) of various metals.
– The biggest feature of WSE-200G is that it can be used for direct current TIG welding of materials such as stainless steel and carbon steel (0.3-4.0mm), as well as for AC TIG welding of aluminum alloys and aluminum magnesium alloy products (0.8-3.0mm).
– 2T/4T working mode conversion function: In the traditional welding/stopping 2T welding, the 4T welding function of starting/welding/ending/stopping has been added, improving the welding quality of the entire weld seam.
– WSE-200G has a cleaning pulse width adjustment function: when the current flows from the tungsten needle to the workpiece, it is the reverse current time. At this time, it can clean the surface oxide layer of the workpiece, which helps to achieve good welding results.
– WSE-200G has a current attenuation adjustment function: When welding is completed and the arc is not terminated, to ensure good forming, the current is required to gradually decrease to a stop.
– WSE-200G has gas delay function: The workpiece that has just been welded will be oxidized due to the heat, so after stopping welding, the argon gas blown out by the welding gun should be used to cool for a period of time.

Argon Arc Welder (5)

Specification

Argon Arc Welder (1)

Pulse TIG welding machine (1)

TIG-250P 220V AD/DC Square Wave Pulse Argon Arc Welder

Xinsheng Welder — Thu, 14 Mar 2024 07:55:36 +0000

Feature

Argon welding/manual welding function:
Xenon arc welding when the conversion switch is set to “TIG” position; Manually weld the switch when it is in the “MMA” position.
AC/DC conversion function:
When the conversion switch is set to “AC” position, it is AC argon arc welding and can weld aluminum materials. When the conversion switch is set to “DC” position, it is DC argon arc welding and can weld metals such as stainless steel, iron, and copper.
2T/4T conversion function:
On the traditional welding/stopping 2T welding, the 4T welding function of starting/welding/ending/stopping has been added. Lighting for arc initiation allows welders to easily locate the weld seam; The small current for arc suppression (fixed 30A) solves the problem of arc pits at the end of the weld seam.
Adjustable starting current:
DC/AC argon arc welding machine can adjust the starting current according to the actual workpiece and welding requirements to achieve satisfactory results.
Welding, adjustable base current:
According to the requirements of the welded workpiece, set the corresponding welding current and base current (when the pulse switch is turned to the lower gear, there is no base current)
Adjustable duty cycle:
DC/AC argon arc welding machines should use a smaller duty cycle when the current is high, and a larger duty cycle should be used when the current is high.
Argon gas time adjustable:
The workpiece that has just been welded may be oxidized due to heat, so after stopping welding, the argon gas blown out by the welding gun should be used to cool for a period of time. This knob is used to adjust the exhaust gas blowing time (1-10s).
Cleaning function:
DC/AC argon arc welding machine In AC argon arc welding, the current is continuously alternating in two directions: positive and negative. When the current flows from the working direction to the tungsten needle, it is the forward current time. At this time, the tungsten needle generates less heat and the heat is concentrated, which is beneficial for welding. When the current flows from the tungsten needle to the workpiece, it is the reverse current time, which can clean the surface oxidation of the workpiece.
Comprehensive protection functions for overheating and overcurrent:
When the DC/AC argon arc welding machine operates continuously, for a long time, and with high current, in order to prevent damage to the components due to severe internal heat generation, an overcurrent thermal protection function is set. When this light is on, it is necessary to stop working, rest for a while, or restart.
Remote control function:
The DC/AC argon arc welding machine has a remote control function and can be used with a foot switch. The welding process can adjust the current to prevent aluminum welding from burning through due to overheating, ensuring high efficiency and quality of continuous welding.

Pulse TIG welding machine (3)

Specification

Pulse TIG welding machine (1)

WSM-315G DC Pulse Dual Purpose Argon Arc Welding Machine

Xinsheng Welder — Mon, 26 Feb 2024 09:30:01 +0000

Feature

WSM-315G is a DC pulse argon arc welding machine with the following performance:
Easy to operate: Equipped with a well-designed control panel, it has rich functions and is easy to operate
Precise preset parameters: You can precisely preset parameters such as current ramp up, ramp down, pulse frequency, duty cycle, advance air supply, and delayed air stop time
Manual arc welding function: It has the function of adjusting the arc starting current and thrust current, making arc starting easier and preventing the welding rod from sticking to the workpiece.
This welding machine is suitable for various application scenarios such as stainless steel welding. If you need high-quality welding, Ruiling WSM-315G is a worthwhile choice to consider.
The effect of pulse current:
By using pulse current, the size of the molten pool can be precisely controlled, making it easy to achieve uniform penetration depth. It is suitable for both full position welding and single-sided welding with double-sided forming, especially suitable for welding thin plates.
Suitable for welding difficult to weld metal materials. Pulse current has a significant stirring effect on the point shaped molten pool, and the metal condensation speed in the molten pool is fast, with little high temperature impact, thereby making the weld microstructure fine and reducing the impact of cracks during heat sensitive metal welding.
Pulse arc can achieve large penetration depth with small heat input, minimal thermal deformation of the weld, and larger penetration depth.

WSM-315G argon arc welding machine (5)

Specification

WSM-315G argon arc welding machine (1)

WSM-315G argon arc welding machine (3)

WSM pulse argon arc welder (3)

Manual IGBT Inverter Co2 Gas Shielded Welding Machine

Xinsheng Welder — Tue, 20 Feb 2024 03:04:18 +0000

Feature

The characteristics of this machine are as follows:
1. Adopting advanced inverter technology and strong pulse arc ignition, the success rate of arc ignition is high, and it has the function of eliminating balls when closing the arc.
2. Imported core components such as GBT and professional radiator channels ensure a longer service life for the entire welding machine and its components.
3. Lightweight, small in size, and easy to move.
4. The welding bead is aesthetically pleasing, saves electricity, has a high power factor, and requires low grid capacity.
5. Industrial grade welding machines, with unique anti-interference protection technology, ensure excellent operation in harsh environments such as high temperature dust.
6. Equipped with arc stopping function, after coarse welding wire is welded, release the micro switch of the gun head, and the wire feeding and arc voltage will automatically decay and fill the arc pit.
7. After the new configuration (including wire feeder and welding gun), beautiful aluminum welding beads can be welded.
8. Suitable for welding low carbon steel and alloy steel, suitable for industries such as shipbuilding steel structure, machinery, and hardware.

Specification

Manual Co2 Shielded Welder (10)

WSM-400 Portable AC/DC Pulse Argon Arc Welding Machin For Aluminum

Xinsheng Welder — Sat, 23 Dec 2023 09:24:56 +0000

Feature

1. The WSE-F series welding machine is a high-performance welding machine developed and produced using digital inverter control technology.
2. The functions include AC constant current TIG, current pulse TIG, DC TIG, and manual arc welding.
3. A well-designed operation panel with complete functions and convenient operation.
4. Welding parameters can be accurately preset.
5. The communication frequency and cleaning width can be adjusted to meet the welding process requirements of different aluminum materials.
6. Easy to start arc, stable arc, and easy to control molten pool.
7. Argon arc welding has a water shortage protection function for the welding gun, protecting it.
8. It has remote control function and can adjust the current remotely.
9. Application industries: aerospace, petrochemical, heat exchangers, aluminum furniture, bicycles, etc.

Specification

WSM pulse argon arc welder (1)

WSM pulse argon arc welder (3)

WSM pulse argon arc welder (5)

WSEM500F Inverter AC/DC Pulse Argon Arc Welder For Aluminum

Xinsheng Welder — Sat, 23 Dec 2023 09:19:44 +0000

Feature

The WSEM500F pulse argon arc welding machine is a digital microcontroller that can perform AC/DC TIG welding with pulse function. It can weld various materials such as carbon steel, stainless steel, galvanized sheet, copper, aluminum, and aluminum alloy.
It has a special four-step welding process that reduces the welding defect of arc striking and arc suppression. It can also adjust the pulse current, pulse frequency, pulse width, ac current, ac frequency, cleaning proportion and ac bias proportion to obtain the optimal welding quality and extend the service life of tungsten electrode.

Specification

WSEM500 DCAC (1)

WSEM500 DCAC (4)

Custom ZF1300 Straight Seam Welding Machine For Metal Plate

Xinsheng Welder — Sat, 23 Dec 2023 09:10:21 +0000

Feature

Some of the features of the ZF1300 straight seam welding machine are:
It can weld longitudinal seams of cylindrical workpieces, such as pipes or tanks.
It can use different welding processes, such as MIG welding, TIG welding, submerged arc welding, plasma welding, etc.
It has a CNC control system that can adjust the welding parameters, such as current, voltage, speed, pulse frequency, etc.
It can weld various metals, such as carbon steel, stainless steel, aluminum, copper, etc.
It has a frame, principal axis, running gear, pressed bodies, locking mechanism, welding torch and lifting device, wire feeder, operation box, air source treatment system, electrical control system.

Specification

ZF1300 straight seam welding machine (1)

ZF1300 straight seam welding machine (3)

ZF1300 straight seam welding machine (4)

ZF1300 straight seam welding machine (5)

Argon Arc Straight Seam Welding Machine For Steel Cylinder

Xinsheng Welder — Sat, 23 Dec 2023 08:33:18 +0000

Feature

1. The welding host adopts a cantilever structure, and the frame is made of steel material bent and welded.
2. Pneumatic compression structure, tightly arranged along both sides of the straight seam, and the butt weld seam is uniformly compressed throughout the entire welding length range; The spacing between the left and right keys can be adjusted to adapt to the welding of different workpieces.
3. According to the thickness size of the workpiece, a cylinder type is used with sufficient clamping force to prevent thermal deformation during the welding process.
4. The welding core shaft is embedded with a copper water-cooled circulation system mold; Provide weld seam back gas protection function. According to the processing of different welding process slots for cylindrical or flat workpieces, achieve single-sided welding and double-sided forming.
5. The distance between the welding core shaft and the pressure plate is adjustable, which can adapt to the welding requirements of workpieces with different thicknesses.
6. The welding gun is driven by a DC servo motor. Inner layer steel wire belt transmission, Taiwan precision track, smooth walking.
7. All air pipes and cables are placed inside the drag chain, with a clean and beautiful appearance, while avoiding cable breakage.
8. High weld quality and high degree of automation.

Specification

Straight seam welder (1)